Xerox DocuPrint N24 Service Manual page 140

Figure 4.2.6j. Take Away Roll Shaft.
40 Remove the screw that secures the grounding strap to the front end of the assembly (Figure
4.2.6k). Remove the grounding strap.
Figure 4.2.6k. Grounding Strap.
Perform the following steps on the NEW assembly.
41 Remove the screw that secures the Spring Support Assembly and bracket (Figure 4.2.6l).
42 Remove the Spring Support Assembly (Figure 4.2.6l).
43 Remove the outboard bearing, the E-ring, then the inboard bearing (Figure 4.2.6l).
2/2000
Repair Procedures 4-26 DocuPrint N24, N32, N40, N3225 and N4025