Xerox DocuPrint N24 Service Manual page 942

3- Exit/Eject
The Transport Rolls within the Compiler continue driving the paper out of the Transport Chute. The trail
edge of the paper deactuates the Transport Exit Sensor. The Compiler Transport Rolls drive the paper
further into the Compiler where the leading edge of the paper actuates the Compiler Bin Exit Sensor.
The Exit Rolls and Paddle Assembly drive the paper to the Eject Roll. The Eject Roll and Paddle
Assembly drive the paper out into a Finisher Bin.
Exit/Eject Paper Path Components
1 Transport Rolls and Pinch Rolls
Drives paper through the Compiler.
2 Complier Bin Exit Sensor
Monitors paper entering and leaving the Compiler entrance.
3 Exit Roll and Paddle Assembly
Drives paper to the Offset/Eject Rolls.
4 Eject Roll and Paddle Assembly
Drives paper into a Finisher Bin.
5 Offset Pinch Roll
Shifts an exiting set of sheets so each set of sheets entering the Finisher Bin is offset slightly
from the previous set.
Options
3/99
8-504 DocuPrint N24, N32 and N40 Service Manual