Xerox DocuPrint N24 Service Manual page 165

Replacement
1 Position the Senor so the P/J connector faces the screw hole in the Sensor Bracket.
2 Insert the Sensor latches into the two opening in the Bracket.
3 Reconnect the P/J to the No-Paper Sensor.
4 Insert the Bracket prong through the opening in the back of the Feeder.
5 Slide the Bracket to the right so the screw hole in the Bracket lines up with the screw hole in the
Feeder. Secure the Bracket to the Feeder.
6 Manually actuate the MBF Gate to make sure it moves freely between the arms of the Sensor.
7 Reinstall the MBF Assembly.
8 Verify proper operation.
DocuPrint N24, N32, N40, N3225, and N4025
Figure 4.3.6b. No Paper Sensor.
2/2000
4-51 Repair Procedures