Rep 8.4.3.16 Tray 4 Bottom Plate Lift Wires - Xerox DocuPrint N24 Service Manual

REP 8.4.3.16 Tray 4 Bottom Plate Lift Wires

Parts List on PL 8.4.2.12
Removal
1 Switch the printer power off and disconnect the AC power cord.
2 Remove Tray 4 (REP 8.4.3.15).
3 Remove screw that secures the Tray 4 Front Cover (Figure 8.4.3.16a). Remove the Front Cover.
4 Remove the five screws from Tray 4 Shaft Cover, and remove the Shaft Cover by sliding it to the
rear (Figure 8.4.3.16a).
5 Remove the screw that secures the Tray 4 Retard Gear Bracket (Figure 8.4.3.16a). Remove the
bracket.
6 Remove the E-ring securing the Bottom Plate Lift Gear (Figure 8.4.3.16a). Remove the Lift Gear.
7 Slide the front Bottom Plate Lift Pulley away from cables to release the front cable anchors
(Figure 8.4.3.16a).
8 Slide the Bottom Plate Lift Shaft toward the rear.
9 Slide the rear Bottom Plate Lift Pulley away from cables to release the rear cable anchors (Figure
8.4.3.16a).
DocuPrint N24, N32 and N40 Service Manual
Figure 8.4.3.16a. Tray 4 Lift Wires.
3/99
8-213 Options