Xerox DocuPrint N24 Service Manual page 682

Tray 3 Paper Path Components
The HCF Tray 3 Paper Path is made up of a number of transport rolls and paper sensors.
1 Tray 3 Assembly
Holds plain paper of various sizes. Slides into the top feeder, Feeder 3, of the High Capacity
Feeder.
2 Tray 3 Lift Up Motor
Raises the tray bottom plate so the paper contacts the Feed Roll.
3 Tray 3 No Paper Sensor
Monitors the level of paper in Tray 3.
4 Tray 3 Paper Size Sensor
Monitors the size of paper that is loaded into Tray 3.
5 Tray 3 Feed Clutch
Transmits HCF Motor drive to the Tray 3 Feed Roll and Nudger Roll
6 Tray 3 Nudger Roll
Drives the top sheet of paper into the Feed Roll.
7 Tray 3 Feed Roll
Drives the top sheet of paper out of Tray 3 and into the Tray 2 Take Away Roll area of the base
engine.
8 Tray 2 Take Away Sensor
Monitors paper travel from the HCF into the base engine.
9 Tray 2 Take Away Roll
Drives the sheet of paper into the printer Registration Rolls.
Options
3/99
8-244 DocuPrint N24, N32 and N40 Service Manual