Xerox DocuPrint N24 Service Manual page 686

Tray 5 Paper Path Components
The HCF Tray 5 Paper Path is made up of a number of transport rolls and paper sensors.
1 Tray 5 Assembly
Holds plain paper of various sizes. Slides into the bottom right feeder, Feeder 5, of the High
Capacity Feeder.
2 Tray 5 Lift Up Motor
Raises the tray bottom plate so the paper contacts the Feed Roll.
3 Tray 5 No Paper Sensor
Monitors the level of paper in Tray 5.
4 Tray 5 Paper Size Sensor
Monitors the size of paper that is loaded into Tray 5.
5 Tray 5 Feed Clutch
Transmits HCF Motor drive to the Tray 5 Feed Roll and Nudger Roll
6 Tray 5 Nudger Roll
Drives the top sheet of paper into the Feed Roll.
7 Tray 5 Feed Roll
Drives the top sheet of paper out of Tray 5 and into the Tray 5 Take Away Roll.
8 Tray 5 Take Away Sensor
Monitors paper travel from the Tray 5 Take Away Roll to Tray 4 Take Away Roll.
9 Tray 4 Take Away Roll
Drives the sheet of paper out of Feeder 4 and into Tray 3 Take Away Roll.
10 Tray 4 Take Away Sensor
Monitors paper travel from the Tray 4 Take Away Roll to Tray 3 Take Away Roll.
11 Tray 3 Take Away Roll
Drives the sheet of paper into the Tray 2 Take Away Roll area of the base engine.
12 Tray 2 Take Away Sensor
Monitors paper travel from the HCF into the base engine.
13 Tray 2 Take Away Roll
Drives the sheet of paper into the printer Registration Rolls.
Options
2/2000
8-248 DocuPrint N24, N32, N40, N3225, and N4025