Xerox DocuPrint N24 Service Manual page 656

Replacement
1 Reinstall the HCF Drive Roll Shaft into the printer.
2 Reinstall the Bearing and E-ring on the front of the HCF Drive Roll Shaft.
3 Reinstall the Bearing on the rear of the shaft.
4 Reinstall the Gear and E-ring on the rear of the shaft.
5 Reinstall the Tray 4 Drive Gear #2 and E-ring.
6 Reinstall the Stopper Bracket and secure with the screws.
7 Reinstall the Inner Chute and secure with the screws.
8 Reinstall the Retard Assembly Spring.
9 Close the HCF Left Cover.
10 Reinstall the HCF Rear Cover.
11 Close Tray 5 and reinstall Tray 3.
12 Verify Proper Operation.
Options
3/99
8-218 DocuPrint N24, N32 and N40 Service Manual