Rep 8.2.3.6 Bin 1 Jam Sensor - Xerox DocuPrint N24 Service Manual

REP 8.2.3.6 BIN 1 Jam Sensor

Parts List on PL 8.2.2.3
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Mailbox Top Cover Assembly (REP 8.2.3.4).
3 Disconnect the BIN 1 Jam Sensor connector.
4 Remove the screw securing the BIN 1 Jam Sensor to the ACT Cover.
5 Remove BIN 1 Jam Sensor from the ACT Cover.
Replacement
1 Reinstall BIN 1 Jam Sensor to the ACT Cover. Make sure you insert the Sensor actuator through
the rectangular slot.
2 Use screw to secure the Sensor to the Cover.
3 Reconnect the BIN 1 Jam Sensor connector.
4 Reinstall the Mailbox Top Cover Assembly.
5 Verify proper operation.
Options
Figure 8.2.3.6a. BIN 1 Jam Sensor.
3/99
8-88 DocuPrint N24, N32 and N40 Service Manual