Rep 8.5.3.24 Bottom Bin Motor - Xerox DocuPrint N24 Service Manual

REP 8.5.3.24 Bottom Bin Motor

Parts List on PL 8.5.2.5
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Harness Cover (REP 8.5.3.8).
3 Remove the Bottom Bin Assembly (REP 8.5.3.18).
4 Remove the Bottom Bin Rear Cover (REP 8.5.3.19).
5 Remove the four screws securing the Motor Bracket to the Bin, and remove the Bracket and
attached Motor (Figure 8.5.3.24a).
6 Remove the E-ring securing the Gear to the Motor shaft, and remove the Gear (Figure
8.5.3.24a).
7 Remove the two screws securing the Motor to the Bracket, and remove the Motor (Figure
8.5.3.24a).
Replacement
1 Reinstall the Motor on the Motor Bracket, and use two screws to secure the Motor.
2 Reinstall the Gear onto the end of the Motor shaft and secure with the E-ring.
3 Reinstall the Motor Bracket. Use four screws to secure the Bracket.
4 Reinstall the Back Cover.
5 Reinstall the Bottom Bin Assembly.
6 Reinstall the Harness Cover.
Options
Figure 8.5.3.24a. Bin Motor.
3/99
8-348 DocuPrint N24, N32 and N40 Service Manual