Xerox DocuPrint N24 Service Manual page 159

Replacement
1 Position the Feed Roll so the metal end of the hole is facing the No-Paper Sensor.
2 Press down the Retard Pad and slide the MBF Feed Roll onto the Feed Shaft.
3 Use a K-clip to secure the Roll to the shaft.
4 Reinstall the No-Paper Sensor Bracket onto the Feeder Assembly, and use one screw to secure
it to the Assembly.
5 Reinstall the MBF Top Cover.
6 Reinstall the MBF Assembly.
7 Reinstall the Duplex Module.
8 Verify proper operation.
DocuPrint N24, N32, N40, N3225, and N4025
2/2000
4-45 Repair Procedures