Rep 8.3.3.7 Envelope Feeder Pwb - Xerox DocuPrint N24 Service Manual

REP 8.3.3.7 Envelope Feeder PWB

Parts List on PL 8.3.2.2
Removal
1 Switch off the printer power and disconnect the AC
Power Cord.
2 Remove the Envelope Feeder from the base engine.
3 Remove the Bottom Cover (REP 8.3.3.1).
4 Remove the Top Cover (REP 8.3.3.2).
5 Remove the Rear Cover (REP 8.3.3.4).
6 Disconnect the six P/Js from the Envelope Feeder PWB (Figure 8.3.3.7a).
7 Remove the two screws securing the PWB to the frame, and remove the PWB (Figure 8.3.3.7a).
Replacement
1 Reinstall the Envelope Feeder PWB onto the Envelope Feeder frame.
2 Use two screws to secure the PWB to the frame.
3 Reconnect the six P/Js to the PWB.
4 Reinstall the Rear Cover.
5 Reinstall the Top Cover.
6 Reinstall the Bottom Cover.
7 Verify proper operation.
DocuPrint N24, N32 and N40 Service Manual
Figure 8.3.3.7a. Envelope Feeder PWB.
3/99
8-143
CAUTION
These components are susceptible
to electrostatic discharge. Observe
all ESD procedures to avoid
damage.
Options