Xerox DocuPrint N24 Service Manual page 157

Replacement
1 Slide pivot hole on the left side of the Tray onto the metal shaft on the Rear Support.
2 Push out on the Front Support as you slightly bow the Tray, and slid the pivot hole on the right
side of the Tray into the metal shaft on the Front Support.
3 Insert the free end of the Tray Spring into the slot at the left edge of the Tray.
4 Route harness, then reconnect P/J107 that runs to the Tray Assembly.
5 Reinstall the MBF Top Cover and use two screws to secure it to the MBF Assembly.
6 Reinstall the MBF Assembly.
7 Reinstall the Duplex Unit.
8 Verify proper operation.
DocuPrint N24, N32, N40, N3225, and N4025
2/2000
4-43 Repair Procedures