Rep 8.4.3.14 Left Cover Assembly - Xerox DocuPrint N24 Service Manual

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

REP 8.4.3.14 Left Cover Assembly

Parts List on PL 8.4.2.11

1 Switch the printer power off and disconnect the AC power cord.

2 Remove the HCF Left Cover (REP 8.4.3.2).

3 Open the Left Cover Assembly.

4 Remove the two screws securing the Left Cover Straps to the Left Cover Assembly (Figure

5 Remove the E-ring that is located on the left end of the shaft, and slide the Left Cover Assembly

off of the shaft (Figure 8.4.3.14a).

1 Reinstall the Left Cover Assembly onto the shaft.

2 Reinstall an E-ring to the left end of the shaft to secure the Assembly to the shaft.

3 Reinstall the Left Cover Straps and use two screws to secure them.

4 Reinstall the HCF Left Cover.

DocuPrint N24, N32 and N40 Service Manual

Figure 8.4.3.14a. Left Cover Assembly

Table of Contents