REP 8.5.3.30 Middle Bin Half and Full Sensors
Parts List on PL 8.5.2.7
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Harness Cover (REP 8.5.3.8).
3 Remove the Middle Bin Assembly (REP 8.5.3.28).
4 Remove the Middle Bin Rear Cover (REP 8.5.3.29).
5 Remove the screw securing the Sensor Bracket to the Bin Frame, and remove the Bracket
(Figure 8.5.3.30a).
6 Disconnect P857 from the Half Sensor (Figure 8.5.3.30a).
7 Press in and release the Half Sensor latches that are securing the Sensor to the Bracket, and
remove the Sensor (Figure 8.5.3.30a).
8 Disconnect P858 from the Full Sensor (Figure 8.5.3.30a).
9 Press in and release the Full Sensor latches that are securing the Sensor to the Bracket, and
remove the Sensor (Figure 8.5.3.30a).
Options
Figure 8.5.3.30a. Middle Bin Half and Full Sensors
3/99
8-358
DocuPrint N24, N32 and N40 Service Manual