Xerox DocuPrint N24 Service Manual page 680

Mechanical Drive Tray 5 Components
The Mechanical Drive for Tray 5 of the HCF is made up of two motors along with associated gears that
transmit the motor drive to the various Tray 5 paper transport rolls.
1 Feed Motor
Provides most the mechanical drive for Tray 5 paper feed.
2 HCF Drive Belt
Transmits Feed Motor drive to the HCF Drive Pulley.
3 HCF Drive Pulley
Transmits Feed Motor drive to the HCF Drive Transmission Gear 1.
4 HCF Drive Transmission Gear 1
Transmits Feed Motor drive to the HCF Drive Transmission Gear 2 and to the Tray 5 Drive Gear.
5 Tray 5 Drive Gear
Transmits Feed Motor drive to the Tray 5 Take Away Gear.
6 HCF Drive Transmission Gear 2
Transmits Feed Motor drive to the Tray 5 Feed Clutch.
7 Tray 5 Feed Clutch
When actuated by the HCF Drive PWB, the Clutch transmits drive to the Tray 5 Feed Roll and to
the Tray 5 Retard Gear.
8 Tray 5 Retard Gear
Rotates the Tray 5 Retard Roll.
9 Tray 5 Take Away Gear
Rotates the Tray 5 Take Away Roll.
10 Lift Up Motor 5
Raises the paper tray in Feeder 5.
Options
3/99
8-242 DocuPrint N24, N32 and N40 Service Manual