Rep 4.1.3 Upper Rear Cover Assembly - Xerox DocuPrint N24 Service Manual

REP 4.1.3 Upper Rear Cover Assembly

Parts List on PL 1.3
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the two screws securing the Upper Rear Cover Assembly to the printer frame (Figure
4.1.3a).
3 Lift the cover 1/4" (6 mm), pull the bottom of the Rear Cover away from the printer frame, and
slide the Cover down to remove (Figure 4.1.3a).
Replacement
1 Slide the top edge of the Rear Cover under the edge of the Top Cover, then press the Rear Cover
against the printer frame.
2 Slide the Cover down so the bottom edge catches the lip of the printer frame (Figure 4.1.3a)
(inset).
3 Use two screws to secure the Rear Cover Assembly to the printer frame.
4 Reconnect the AC power cord to the rear of the printer.
5 Verify proper operation.
DocuPrint N24, N32 and N40 Service Manual
Figure 4.1.3a. Rear Cover Assembly.
3/99
4-9 Repair Procedures