REP 4.2.5 Tray 1 & 2 Feed Roll, Nudger Roll, and Retard Roll
Parts List on PL 3.2 / PL 3.5
Replace the Feeder, Nudger, and Retard Rolls as a set.
Removal
1
Switch off the printer power and disconnect the AC Power Cord.
2
Remove the paper tray from the appropriate feeder.
3
Use a small screwdriver to gently pull out on the tab on the front of the Chute, and remove the Chute.
4
Pull out on the Roll latch and slide the Rolls off of the shaft. Repeat for the remaining two rolls.
DocuPrint N24, N32 and N40 Service Manual
Figure 4.2.5a. Feed, Nudger, and Retard Roll.
3/99
4-19
Repair Procedures