Rep 8.1.3.12 Duplex Interlock Switch - Xerox DocuPrint N24 Service Manual

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

REP 8.1.3.12 Duplex Interlock Switch

Parts List on PL 8.1.2.4

1 Switch off the printer power and disconnect the AC Power Cord.

2 Remove the Duplex Cover (REP 8.1.3.2).

3 Remove the Duplex Front Cover (REP 8.1.3.4).

4 Disconnect the P/J from the Interlock Switch (Figure 8.1.3.12a).

5 Squeeze the two latches securing the Duplex Interlock Switch to the Duplex frame, and remove

1 Insert the two latches and one locating tab of the Duplex Interlock Switch into the two rectangular

and one round opening in the side of the Duplex frame. The Switch snaps into place.

2 Reinstall the Outer Chute into the Duplex frame, and use four screws to secure the Chute to the

3 Route the wire harnesses into the wire clips that are located under the Outer Chute.

4 Reconnect the P/J to the Interlock Switch.

DocuPrint N24, N32 and N40 Service Manual

Figure 8.1.3.12a. Duplex Interlock Switch

Table of Contents