Xerox DocuPrint N24 Service Manual page 401

Deletions (Line, Band, Spot)
Inspect Test Prints for the presence of deletions (missing image). There should be no deletions
with a diameter larger than 0.5 mm visible on test prints, (Figure 7.33c).
1 There are deletions on the test prints.
Y N
| Go to the Fusing on the following page.
2 There are Vertical (in direction of paper movement) Line/Band deletions present.
Y N
|
Go to step 4.
3 Go to RAP 7.37.
4 There are Horizontal (in direction of scanning) Line/Band Deletions present.
Y N
|
Go to step 6.
5 Go to RAP 7.38.
6 There are Spot Deletions present.
Y N
| The defect apparently isn't manifesting as a deletion, continue to the Fusing checkout on
the next page
7 Go to RAP 7.41.
DocuPrint N24, N32 and N40 Service Manual
Figure 7.33c. Test Prints
asm7-12
3/99
7-47
asm7-14
Repair Analysis Procedures (RAP)
asm7-18