Repair Analysis Procedures; Rap 8.2.7.1 Error Code "Paper Jam Clear Area D - Xerox DocuPrint N24 Service Manual

8.2.7 Repair Analysis Procedures

RAP 8.2.7.1 Error Code "Paper Jam Clear Area D"

1 Inspect the paper that is loaded in the paper cassette. The paper loaded in the cassette smooth
(not wrinkled) and undamaged.
Y N
|
Replace the paper with new paper.
2 Open the Mailbox Left Cover and observe if a sheet of paper entered or started to enter a Bin.
There a sheet of paper inside a Bin or at the entrance to a Bin.
Y N
|
Go to step 7.
3 Enter Diagnostic Mode - Input H/L, Vertical Sensor Detect. Insert a sheet of paper into the
Vertical Sensor path and press [4], then remove the sheet of paper and press [4]. The Control
Panel LCD displays "IS WITH PAPER" when you insert the paper into the Vertical Sensor and
displays "IS WITHOUT PAPER" when the paper is removed.
Y N
|
Replace the Vertical Sensor (PL 8.2.2.6).
4 Enter Diagnostic Mode - Input H/L, 1 Bin Jam Sensor Detect. Insert a sheet of paper into the BIN
1 Jam Sensor and press [4], then remove the sheet of paper and press [4]. The Control Panel
LCD displays "IS WITH PAPER" when you insert the paper into the BIN 1 Jam Sensor and
displays "IS WITHOUT PAPER" when the paper is removed.
Y N
|
Replace the BIN 1 Jam Sensor (PL 8.2.2.3).
5 Replace the Mailbox Control PWB (PL 8.2.2.7). The error message reappears.
Y N
|
Problem solved.
6 Replace the Printer Engine Controller PWB (REP 4.10.6).
7 The paper passed the IN Sensor actuator.
Y N
|
Go to step 10.
8 Enter Diagnostic Mode - Input H/L, IN Sensor Detect. Insert a sheet of paper into the IN Sensor
and press [4], then remove the sheet of paper and press[4]. The Control Panel LCD displays "IS
WITH PAPER" when you insert the paper into the Mailbox IN Sensor, and displays "IS WITHOUT
PAPER" when the paper is removed.
Y N
|
Check wiring between P/J 815 and P/J 801 (WIR 8.2.5.1). If OK, replace the IN Sensor (PL
8.2.2.6).
9 Replace the Mailbox Control PWB.
DocuPrint N24, N32 and N40 Service Manual
3/99
8-125 Options