Rep 4.8.6 Offset Motor - Xerox DocuPrint N24 Service Manual

REP 4.8.6 Offset Motor

Parts List on PL 9.1
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Open the Duplex Unit if one is installed.
3 Remove the Fuser Full Cover (REP 4.1.1).
4 Carefully rotate the motor shaft fully clockwise (Figure 4.8.6a) (the Offset Rollers are moved
toward the front of the printer).
5 Remove the two screws that secure the Motor Mounting Bracket to the Offset / Exit Assembly
(Figure 4.8.6a).
6 Lift the Offset Rollers as you lift the Offset Motor to disengage the motor cam.
7 Disconnect the harness from the Offset Motor.
8 Remove the two screws that secure the Offset Motor to the mounting bracket.
Replacement
1 Assemble in reverse order.
2 Verify proper operation.
DocuPrint N24, N32, N40, N3225, and N4025
Figure 4.8.6a. Offset Motor.
2/2000
4-77 Repair Procedures