Rep 8.5.3.8 Harness Cover - Xerox DocuPrint N24 Service Manual

REP 8.5.3.8 Harness Cover

Parts List on PL 8.5.2.2
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the three screws securing the Harness Cover to the rear Finisher frame (Figure
8.5.3.8a).
3 Remove the Cover.
Replacement
1 Reinstall the Harness Cover as shown in the figure.
2 Use three screws to secure the Cover to the Finisher frame.
Options
Figure 8.5.3.8a. Harness Cover.
3/99
8-322 DocuPrint N24, N32 and N40 Service Manual