Rep 8.4.3.10 Trays 3, 4, And 5 Paper Level Sensors - Xerox DocuPrint N24 Service Manual

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

REP 8.4.3.10 Trays 3, 4, and 5 Paper Level Sensors

Parts List on PL 8.4.2.3

1 Switch the printer power off and disconnect the AC power cord.

2 Remove the Paper Tray associated with the Paper Level Sensor you are going to remove.

3 Squeeze the Sensor latches and remove the Paper Level Sensor from the frame (Figure

4 Disconnect the Paper Level Sensor P/J (Figure 8.4.3.10a).

1 Reconnect the Paper Level Sensor P/J.

2 Reinstall the Paper Lever Sensor into the slot in the frame, and press in on the Sensor until the

latches snap into place.

3 Reinstall the Paper Tray.

Figure 8.4.3.10a. Trays 3, 4, and 5 Paper Level Sensors

DocuPrint N24, N32 and N40 Service Manual

Table of Contents