Rep 4.3 Multisheet Bypass Feeder (Mbf) Assembly; Rep 4.3.1 Mbf Assembly - Xerox DocuPrint N24 Service Manual

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

REP 4.3 Multisheet Bypass Feeder (MBF) Assembly

Parts List on PL 4.1

1 Switch off the printer power and disconnect the AC Power Cord.

2 Remove the Duplex Unit, if one is installed.

NOTE: In the next step, do not grasp the MBF mounting bracket and edge covers

3 Grasp both sides of the MBF Assembly. Be sure to grasp the metal frame under the MBF and the

MBF Top Cover (Figure 4.3.1a).

4 Use steady pressure and pull the MBF Assembly straight out from the printer (Figure 4.3.1a).

1 Hold the MBF Assembly level with the MBF mounting bracket.

2 Slide the MBF Assembly into the mounting bracket until it locks into place.

3 Reinstall the Duplex Unit.

4 Verify proper operation.

DocuPrint N24, N32, N40, N3225, and N4025

Figure 4.3.1a. MBF Assembly.

Repair Procedures

Table of Contents