Xerox DocuPrint N24 Service Manual page 120

Replacement
1 Open the Duplex Unit if one is installed.
2 Open the Front Left Cover Assembly.
3 Slide the Fuser Full Cover over the Fuser Assembly.
4 Slide the tabs located at both ends of the Cover into the corresponding openings in the Top
Cover Assembly (Figure 4.1.1b).
5 Press the Fuser Full Cover into place. Make sure the tabs remain in place.
6 Use two screws to secure the Fuser Full Cover.
7 Verify proper operation.
Figure 4.1.1b. Fuser Full Cover Replacement.
3/99
Repair Procedures 4-6 DocuPrint N24, N32 and N40 Service Manual