Rep 4.9 Main Drive; Rep 4.9.1 Main Drive Assembly - Xerox DocuPrint N24 Service Manual

REP 4.9 Main Drive

REP 4.9.1 Main Drive Assembly

Parts List on PL 10.1
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Open the Left Upper Cover Assembly.
3 Remove the EP Cartridge (REP 4.5.1).
CAUTION Do not attempt to remove the Main Drive Assembly without first removing the EP
Cartridge (CRU).
4 Remove the Fuser Full Cover (REP 4.1.1).
5 Remove the Rear Cover (REP 4.1.3).
6 Remove the Left Cover Interlock Switch Assembly (REP 4.10.5).
7 Remove the screw securing the Inner Cover - LH (PL 1.3) to the printer frame. Close the Left
Upper Cover Assembly half-way to free the Inner Cover from the interlock actuator. Remove the
Inner Cover.
8 From the rear of the Offset / Exit Assembly, disconnect the two connectors (P/J 104 and P/J 602)
(Figure 4.9.1a).
9 From the rear of the Offset / Exit Assembly, disconnect the three lower connectors (P/J 209, 600,
and 601) (Figure 4.9.1a).
Repair Procedures
Figure 4.9.1a. Offset / Exit Assembly Connectors.
2/2000
4-78 DocuPrint N24, N32, N40, N3225 and N4025