Rep 8.5.3.4 Lower Front Cover - Xerox DocuPrint N24 Service Manual

REP 8.5.3.4 Lower Front Cover

Parts List on PL 8.5.2.1
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Roll the Finisher away from the printer until it stops.
3 Remove the three screws securing the Lower Front Cover to the Finisher frame (Figure
8.5.3.4a).
4 Pull the Cover to the left and remove it from the frame.
Replacement
1 Position the Cover as shown in figure 8.5.3.4a.
2 Slide the Cover onto the frame so the tabs on the frame fit into the rectangular cutouts in the
Cover.
3 Press the Cover against the frame.
4 Use 3 screws to secure the Cover to the frame.
5 Reassemble the Finisher to the printer.
Options
Figure 8.5.3.4a. Lower Front Cover.
3/99
8-318 DocuPrint N24, N32 and N40 Service Manual