Xerox DocuPrint N24 Service Manual page 953

Finisher Control Components
1 Finisher PWB
The Finisher PWB controls all Finisher functions, executes commands sent from the Printer
Engine Controller PWB, and sends information back to the Printer Engine Controller PWB. All
Finisher components are connected to the Finisher PWB.
2 Finisher Low Voltage Power Supply
Takes Line Voltage from the base engine and converts it into regulated +5VDC and +24VDC for
the Finisher.
3 Unload While Run Switch and LED
Switch that allows a user to interrupt the current stacking operation. The LED lights to indicate
the interrupt state.
4 Finisher Interlock Sensor
Monitors the state of the Finisher door.
5 Front Cover Interlock Switch
Cuts +24VDC to the Finisher when the Front Cover is open.
6 Compiler Cover Safety Switch
Cuts +24VDC to the Finisher when the Compiler Cover is open.
7 Finisher Bin Safety Switch
Cuts +24VDC to the Finisher.
DocuPrint N24, N32 and N40 Service Manual
3/99
8-515 Options