Cf Card Configuration; File System Configuration Tasks; Directory-Related Operations - H3C S7500 Series Operation Manual

Operation Manual – File System Management
H3C S7500 Series Ethernet Switches

1.1.2 CF Card Configuration

By installing a CF (compact flash) card in the compact flash slot of a SRPU of an S7500
switch, you can extend the memory space of the switch.
With a CF card seated in the compact flash slot, you can access the root directory
of the CF card by executing the cd cf: command.
The commands used to manipulate files, such as dir, copy, delete, and move,
apply to the files on a CF card.
You can disable a CF card by using the umount cf: command. To use a disabled
CF card again, you need to remove it and install it again.
Perform the following operations to configure a CF card:
Enter the root directory of a CF card
Disable a CF card
Note:
Currently, only Salience III SRPU supports CF card.
The following table lists the operations that can be performed after you enter a directory
on a CF card.

1.1.3 File System Configuration Tasks

Complete the following tasks to perform file system configuration:

Directory-Related Operations

File-Related Operations
Storage Device-Related Operations
Prompt Mode Configuration
1.1.4 Directory-Related Operations
The file system provides directory-related operations, such as:
Creating/deleting a directory
Displaying the current directory
To do...
Task
1-2
Chapter 1 File System Management
Use the command...
cd cf:
umount cf:
Optional
Optional
Optional
Optional
Remarks
Required
Optional
Remarks