Configuring Router Type; Configuring The Line Type Of An Interface - H3C S7500 Series Operation Manual

Operation Manual – Routing Protocol
H3C S7500 Series Ethernet Switches
To do...
Enter system view
Enter interface view
Assign a DIS priority

5.3.5 Configuring Router Type

Follow these steps to configure router type:
Enter system view
Enter IS-IS view
Configure router type

5.3.6 Configuring the Line Type of an Interface

Follow these steps to configure the interface line type:
Enter system view
Enter interface view
Configure the line type of
an interface
Note:
Changing interface line type makes sense only when the interface is on a Level-1-2
router. Otherwise, the router type determines the adjacency hierarchy that can be
established.
Use the command...
system-view
interface interface-type
interface-number
isis dis-priority value
[ level-1 | level-2 ]
To do...
system-view
isis [ tag ]
is-level { level-1 |
level-1-2 | level-2 }
To do...
system-view
interface interface-type
interface-number
isis circuit-level [ level-1
| level-1-2 | level-2 ]
Use the command...
Use the command...
5-10
Chapter 5 IS-IS Configuration
Remarks
—
—
Optional
The default DIS priority is 64.
Remarks
—
—
Required
By default, the router type
is level-1-2.
Remarks
—
—
Required
The default line type is
level-1-2.