H3C S7500 Series Operation Manual page 561

Operation Manual – AAA & RADIUS & HWTACACS & EAD
H3C S7500 Series Ethernet Switches
You can use the reset command in user view to clear the corresponding statistics.
Table 1-30 Display AAA configuration information
Display the configuration
information about one
specific or all ISP
domains
Display the information
about user connections
Display the information
about local users
Table 1-31 Display and maintain RADIUS configuration information
Display the statistics about
local RADIUS
authentication server
Display the configuration
information about one
specific or all RADIUS
schemes
Display the statistics about
RADIUS packets
Display the buffered
no-response RADIUS
stop-accounting request
packets
To do...
display domain [ isp-name ]
display connection [ access-type
dot1x | domain domain-name |
interface interface-type
interface-number | ip ip-address | mac
mac-address | radius-scheme
radius-scheme-name | vlan vlan-id |
ucibindex ucib-index | user-name
user-name ]
display local-user [ domain isp-name
| idle-cut { disable | enable } | vlan
vlan-id | service-type { ftp |
lan-access | ssh | telnet | terminal } |
state { active | block } | user-name
user-name ]
To do...
Chapter 1 AAA & RADIUS & HWTACACS
Use the command...
Use the command...
display local-server statistics
display radius
[ radius-scheme-name ]
display radius statistics
display stop-accounting-buffer
{ radius-scheme
radius-scheme-name | session-id
session-id | time-range start-time
stop-time | user-name user-name }
1-39
Configuration
Remarks
You can
execute the
display
command in
any view
Remarks
You can
execute the
display
command in
any view