Enabling Ndp Globally And For Specific Ports; Configuring Ndp-Related Parameters; Enabling Ntdp Globally And For Specific Ports - H3C S7500 Series Operation Manual

Operation Manual – Cluster
H3C S7500 Series Ethernet Switches
Configuring NTDP-Related Parameters
Enabling the Cluster Function
Configuring Cluster Parameters
Configuring Interaction for the Cluster

1.2.2 Enabling NDP Globally and for Specific Ports

Follow these steps to enable NDP globally and for a specific port:
Enter system view
Enable NDP globally
Enable
NDP for
the
specified
Ethernet
ports

1.2.3 Configuring NDP-Related Parameters

Follow these steps to configure NDP-related parameters:
To do...
Enter system view
Configure the
holdtime of NDP
information
Configure the
interval to send NDP
packets

1.2.4 Enabling NTDP Globally and for Specific Ports

Follow these steps to enable NTDP globally and for specific ports:
Task
To do...
In system view
Enter
In
Ethernet
Ether
port view
net
port
Enable NDP
view
on the port
Use the command...
system-view
ndp timer aging
aging-in-seconds
ndp timer hello
seconds
Use the command...
system-view
ndp enable
ndp enable interface
port-list
interface interface-type
interface-number
ndp enable
—
Optional
By default, the aging time of NDP
packets is 180 seconds
Optional
By default, the interval of sending
NDP packets is 60 seconds
1-7
Chapter 1 Cluster
Remarks
Required
Required
Required
Required
Remarks
—
Required
By default, NDP is
enabled globally
You must choose one
of them
By default, NDP is
enabled on the port
Remarks