H3C S7500 Series Operation Manual page 903

Operation Manual – System Maintenance and Debugging
H3C S7500 Series Ethernet Switches
Switch
FTP Client
Figure 1-8 Remote loading using FTP
Step 1: Download the software to the switch using FTP commands.
<H3C> ftp 10.1.1.1
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):abc
331 Give me your password, please
Password:
230 Logged in successfully
[ftp] get s7500.btm
200 Port command okay.
150 Opening ASCII mode data connection for s7500.btm.
...226 Transfer complete.
FTP: 1177900 byte(s) received in 4.594 second(s) 256.39K byte(s)/sec.
[ftp] bye
Note:
When using different FTP server software on PC, different information will be output to
the switch.
Step 2: Update the Boot ROM program on SRPU of the switch.
<H3C> boot bootrom s7500.btm slot 0
This will update BootRom file on board 0 . Continue? [Y/N] y
Board 0 upgrading BOOTROM, please wait...
Upgrade board 0 BOOTROM succeeded!
Step 3: Restart the switch.
<H3C> reboot
Ethernet port
Internet
Chapter 1 Boot ROM and Host Software
PC
10.1.1 .1
FTP Serve r
1-13
Loading