Device Management Configuration; Device Management Configuration Task List; Restarting The Ethernet Switch - H3C S7500 Series Operation Manual

Hide thumbs Also See for S7500 Series:

Table of Contents

Operation Manual – System Maintenance and Debugging

H3C S7500 Series Ethernet Switches

maintain and manage your physical device, and restart the system when some

functions of the system are abnormal.

4.2 Device Management Configuration

Complete these tasks to configure device management:

Rebooting a Card of Ethernet Switch

Scheduling a Reboot on the Switch

Specifying the APP to be Adopted at Reboot

Updating the Boot ROM

Upgrading Boot ROM along with the Upgrade of ARP

Setting Card Temperature Threshold

Enabling/Disabling RDRAM

Enabling System Load Sharing

4.2.2 Restarting the Ethernet Switch

You can perform the following operation in user view when the switch is in trouble or

needs to be restarted.

When rebooting, the system checks whether there is any configuration change. If there

is, it prompts you to indicate whether or not to proceed. This prevents you from losing

your original configuration due to oblivion after system reboot.

Follow the step to restart the Ethernet switch:

Restart the Ethernet switch

Chapter 4 Device Management

Use the command...

Table of Contents