Configuring Boot Rom Upgrade With App File; Boot Rom Upgrade Configuration - H3C S7500 Series Operation Manual

Operation Manual – Hardware-Dependent Software Configuration
H3C S7500 Series Ethernet Switches
Chapter 1 Hardware-Dependent Software
When configuring hardware-dependent software, go to these sections for information
you are interested in:

Configuring Boot ROM Upgrade with App File

Configuring Inter-Card Link State Adjustment
Configuring Internal Channel Monitoring
Configuring Switch Chip Auto-Reset
1.1 Configuring Boot ROM Upgrade with App File
By enabling Boot ROM to upgrade together with the app file, you can ensure that the
Boot ROM versions of the current SRPU and service cards match the version of the
current app file, thus avoiding invalid feature implementation caused by mismatching.
Two upgrade types are available:
The current startup file as the upgrade file for Boot ROM
The specified App file as the upgrade file for Boot ROM

1.1.1 Boot ROM Upgrade Configuration

Follow these steps to configure Boot ROM upgrade
Set the current startup file as the
upgrade file for Boot ROM
Set the specified App file as the
upgrade file for Boot ROM
Set the primary startup file at next
booting and use it to upgrade Boot
ROM
Configuration
To do...
1-1
Chapter 1 Hardware-Dependent
Use the command...
boot bootrom default [ slot
slot-number-list ]
boot bootrom file-url [ slot
slot-number-list ]
boot boot-loader primary
file-url
Software Configuration
Remarks
Optional
Optional
Optional