Enabling Information Output To A Monitor Terminal - H3C S7500 Series Operation Manual

Operation Manual – Information Center
H3C S7500 Series Ethernet Switches
Enable trap information
terminal display function

1.2.3 Enabling Information Output to a Monitor Terminal

Follow these steps to enable information output to a monitor terminal:
To do...
Enter system view
Enable the
information center
Enable information
output to Telnet
terminal or dumb
terminal
Define an
information source
Set the format of
time stamp
To do...
terminal trapping
Use the command...
system-view
info-center enable
info-center monitor
channel
{ channel-number |
channel-name }
info-center source
{ modu-name | default }
channel
{ channel-number |
channel-name } [ { log |
trap | debug } { level
severity | state state } ]*
info-center timestamp
{ log | trap | debugging }
{ boot | date | none }
Use the
command...
Optional
By default, trap information
terminal display is enabled for
terminal users.
—
Optional
By default, the information
center is enabled.
Required
By default, a switch outputs
log/debugging/trap information
to user terminals through
information channel 1.
Required
Optional
This command is used to set
the time stamp format for
log/debugging/trap information
output.
This determines the time stamp
viewable to users.
1-9
Chapter 1 Information Center
Remarks
Remarks