Resetting Configuration Data Of An Is-Is Peer; Displaying And Maintaining Integrated Is-Is Configuration - H3C S7500 Series Operation Manual

Operation Manual – Routing Protocol
H3C S7500 Series Ethernet Switches
Follow these steps to reset all IS-IS configuration data:
To do...
Enter system view
Reset all IS-IS
configuration data

5.3.26 Resetting Configuration Data of an IS-IS Peer

Follow these steps to reset configuration data of the IS-IS peer:
Enter system view
Reset configuration
data of an IS-IS peer
5.4 Displaying and Maintaining Integrated IS-IS
Configuration
Display brief information
of IS-IS
Display IS-IS link state
database
Display IS-IS SPF logs
Display IS-IS routes
Display IS-IS peer
information
Display mesh group
information
Display IS-IS interface
information
Use the command...
system-view
reset isis all
To do... Use the command...
system-view
reset isis peer
system-id
To do...
display isis brief
display isis lsdb [ [ l1 | l2 | level-1 |
level-2 ] | [ [ lsp-id | local ] |
verbose ]* ]*
display isis spf-log { ip | clns }
display isis route
display isis peer [ verbose ]
display isis mesh-group
display isis interface [ verbose ]
—
Required
By default, IS-IS configuration
data is not cleared.
—
Required
By default, configuration data
of an IS-IS peer is not reset.
Use the command...
5-23
Chapter 5 IS-IS Configuration
Remarks
Remarks
Remarks
Available in
any view