Displaying Port Binding Configuration; Port Binding Configuration Example - H3C S7500 Series Operation Manual

Operation Manual – Port Binding
H3C S7500 Series Ethernet Switches

1.3 Displaying Port Binding Configuration

To do...
Display the
information about
port binding

1.4 Port Binding Configuration Example

I. Network requirements
In order to prevent illegal use of the IP address of PC 1, you may bind the MAC address
and IP address of PC 1 to port Ethernet 2/0/1 on Switch A.
II. Network diagram
Switch A
Figure 1-1 Network diagram for port binding configuratio
III. Configuration procedure
# Enter system view.
<H3C> system-view
# Enter Ethernet 2/0/1 port view.
[H3C] interface Ethernet2/0/1
# Bind the MAC address and the IP address of PC 1 to Ethernet 2/0/1.
[H3C-Ethernet2/0/1] am user-bind mac-addr 0001-0002-0003 ip-addr 10.12.1.1
Use the command...
display am user-bind [ interface
interface-type interface-number |
mac-addr | ip-addr ]
Switch B
Eth2/0/1
MAC: 0001- 0002-0003
IP Address:10.12.1.1
Chapter 1 Port Binding Configuration
Host 1
1-2
Remarks
Available in any
view.
Host 2
n