Displaying And Maintaining Gmrp; Gmrp Configuration Example; Enabling Gmrp - H3C S7500 Series Operation Manual

Operation Manual – Multicast
H3C S7500 Series Ethernet Switches
Enter system view
Enter Ethernet port view
Enable GMRP on the port

2.3 Displaying and Maintaining GMRP

Display the GMRP statistics
information
Display the GMRP global status

2.4 GMRP Configuration Example

2.4.1 Enabling GMRP

I. Network requirements
Implement dynamic registration and update of multicast information between switches.
II. Network diagram
Ethernet2/0/1
SwitchA
Figure 2-1 Networking diagram for GMRP configuration
III. Configuration procedure
Configure SwitchA:
# Enable GMRP globally.
<H3C> system-view
[H3C] gmrp
GMRP is enabled globally.
# Enable GMRP on the port.
[H3C] interface Ethernet2/0/1
[H3C-Ethernet2/0/1] gmrp
To do...
system-view
interface interface-type
interface-number
gmrp
To do...
Ethernet2/0/1
SwitchB
Use the command...
Use the command...
display gmrp statistics
[ interface interface-list ]
display gmrp status
2-2
Chapter 2 GMRP Configuration
Remarks
—
—
Required
Disabled by default.
Remarks
Available in any
view