Operation Manual – Port Binding
H3C S7500 Series Ethernet Switches
Chapter 1 Port Binding Configuration
When configuring port binding, go to these sections for information you are interested
in:
Port Binding Overview
Configuring Port Binding
Displaying Port Binding Configuration
Port Binding Configuration Example
1.1 Port Binding Overview
Port binding enables the network administrator to bind the MAC address and IP
address of a user to a specific port. After the binding, the switch forwards only the
packets received on the port whose MAC address and IP address are identical with the
bound MAC address and IP address. This improves network security and enhances
security monitoring.
1.2 Configuring Port Binding
Follow these steps to configure port binding:
Enter system view
Bind the legal MAC addresses
and IP addresses to the
specified port
Enter port view
Bind the legal MAC addresses
and IP addresses to the
current port
Note:
You can bind up to 100 MAC addresses and IP addresses to one port.
To do...
Chapter 1 Port Binding Configuration
Use the command...
system-view
am user-bind { mac-addr
mac-address | ip-addr
ip-address }* interface-list
interface interface-type
interface-number
am user-bind { mac-addr
mac-address | ip-addr
ip-address }*
1-1
Remarks
—
Optional
—
Optional