Implementation Of Netstream; Configuring Netstream; Netstream Configuration Task List - H3C S7500 Series Operation Manual

Hide thumbs Also See for S7500 Series:
Table of Contents

Advertisement

Operation Manual – NAT, Netstream, Policy Routing
H3C S7500 Series Ethernet Switches
3)
The NDA analyzes the data it received, and the analysis result can be used for
network charging and deployment.

2.1.2 Implementation of Netstream

With Netstream enabled, a stream entry is first created and saved in the Netstream
cache for the system to collect statistics about the stream. Once a preset aging time is
reached, the system sends the stream entry in a Netstream export packet (generated
by encapsulating the stream entry in a UDP packet) to NSC and deletes (ages) the
entry from the Netstream cache.
The aging has two ways:
Aging by active time: a stream entry is aged out when the active time of the stream
(the time elapsed since the stream entry was created) exceeds the corresponding
preset time limit.
Aging by inactive time: a stream entry is aged out when the inactive time of the
stream (the time elapsed since the last packet of the stream passed the switch)
exceeds the corresponding preset time limit.
Netstream can use three versions of Netstream export packets to send aged stream
entries: version 5, version 8 and version 9. But currently, only version 5 and version 9
are configurable:
If version 5 is configured: the system sends normal stream entries through version
5 packets and sends aggregated stream entries through version 8 packets. (For
brevity reason, this will not be mentioned when version 5 is involved in the
following text.)
If version 9 is configured: the system sends all aged stream entries through
version 9 packets.
Note:
If Netstream aggregation is configured, the system classifies and aggregates stream
entries into aggregation entries according to configured aggregation rules, and then
sends aggregation entries through Netstream export packets.

2.2 Configuring Netstream

2.2.1 Netstream Configuration Task List

Complete the following tasks to configure Netstream:
Chapter 2 Netstream Configuration
2-2

Advertisement

Table of Contents
loading

Table of Contents