Storage Device-Related Operations; Prompt Mode Configuration - H3C S7500 Series Operation Manual

Operation Manual – File System Management
H3C S7500 Series Ethernet Switches
Caution:
For files deleted with the /unreserved keyword not specified and with the same
names, only the latest deleted file can be restored.
The files which are deleted using the delete command with the /unreserved
keyword not specified are actually moved to the recycle bin and thus still take
storage space. You can clear the recycle bin to make room for other files by using
the reset recycle-bin command.
In the output information of the dir /all command, deleted files (that is, those in the
recycle bin) are embraced in brackets.
If the configuration files are deleted, the switch adopts the default configuration
when it starts the next time.
The execute command cannot be executed recursively.

1.1.6 Storage Device-Related Operations

With the file system, you can format a storage device, such as the Flash or a CF card.
Note that the format operation leads to the loss of all the data on the storage device and
is irretrievable. For memory spaces that are unavailable due to unexpected errors, you
can use the fixdisk command to restore them.
Perform the following operations to perform storage device-related configuration:
Format a storage device
Restore a storage device

1.1.7 Prompt Mode Configuration

You can set the file system prompt mode to be alert or quiet. When in the alert mode,
the file system prompts for confirmation when you perform irreversible operations (such
as deleting a file completely or overwriting a file). If you are in the quiet mode, you are
not prompted when you execute the operations.
Follow these steps to perform configuration on prompt mode of file system:
To do...
format device
fixdisk device
Chapter 1 File System Management
Use the command...
1-5
Remarks
Optional
Optional