H3C S7500 Series Operation Manual page 5

37 System Maintenance
and Debugging
38 HWPing
39 RRPP
40
NAT-Netstream-Policy
Routing
41 Telnet Protection
42
Hardware-Dependent
Software Configuration
Conventions
The manual uses the following conventions:
I. Command conventions
Convention
Boldface
italic
[ ]
{ x | y | ... }
[ x | y | ... ]
{ x | y | ... } *
[ x | y | ... ] *
&<1-n>
#
Part
Introduces system maintenance and debugging.
Introduces HWPing and the related configuration.
Introduces RRPP and the related configuration.
Introduces NAT, Netstream, policy-based routing, and
the related configurations.
Introduces Telnet securing and the related configuration.
Introduces hardware-dependent software and the
related configuration.
The keywords of a command line are in Boldface.
Command arguments are in italic.
Items (keywords or arguments) in square brackets [ ] are
optional.
Alternative items are grouped in braces and separated by
vertical bars. One is selected.
Optional alternative items are grouped in square brackets
and separated by vertical bars. One or none is selected.
Alternative items are grouped in braces and separated by
vertical bars. A minimum of one or a maximum of all can be
selected.
Optional alternative items are grouped in square brackets
and separated by vertical bars. Many or none can be
selected.
The argument(s) before the ampersand (&) sign can be
entered 1 to n times.
A line starting with the # sign is comments.
Contents
Description