H3C S7500 Series Operation Manual page 929

Operation Manual – System Maintenance and Debugging
H3C S7500 Series Ethernet Switches
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:
230 Logged in successfully
[ftp]
# Execute the get command to download the switch.app and boot.btm files on the FTP
server to the Flash memory of the switch.
[ftp] get switch.app
[ftp] get boot.btm
# Execute the quit command to terminate the FTP connection and return to user view.
[ftp] quit
<H3C>
# Update the Boot ROM.
<H3C> boot bootrom boot.btm slot 0
This will update BootRom file on board 0 . Continue? [Y/N] y
Board 0 upgrading BOOTROM, please wait...
Upgrade board 0 BOOTROM succeeded!
# Specify the downloaded application program as the host software to be adopted when
the switch starts next time. Then restart the switch to update the host software of the
switch.
<H3C> boot boot-loader primary switch.app
The specified file will be booted next time!
<H3C> display boot-loader
The primary app to boot of board 0 at the next time is: flash:/switch.app
The backup app to boot of board 0 at the next time is: flash:/old.app
The app to boot of board 0 at this time is: flash:/old.app
<H3C> reboot
System is checking configuration now. Please wait ...
This command will reboot the system. The current configuration has not been
saved and will be lost if you continue. Continue? [Y/N] y
4-13
Chapter 4 Device Management