Configure Member Devices To Access Ftp/Tftp Server Of The Cluster; Intra-Cluster Configuration - H3C S7500 Series Operation Manual

Operation Manual – Cluster
H3C S7500 Series Ethernet Switches
Enter system view
Enable NTDP globally
Enter Ethernet port view
Enable NTDP for the port

1.3.4 Configure Member Devices to Access FTP/TFTP Server of the Cluster

Perform the following configuration on a member device:
Access the public FTP
server of the cluster
Download files from the
public TFTP server of the
cluster
Upload files to the public
TFTP server of the cluster

1.4 Intra-Cluster Configuration

Follow these steps to configure a cluster:
Enter system view
Enter cluster view
Add a candidate device to
a cluster
Remove a member device
from the cluster
Reboot a specified
member device
Return to system view
Return to user view
To do...
system-view
ntdp enable
interface interface-type
interface-number
ntdp enable
To do...
ftp cluster
tftp cluster get
source-file
[ destination-file ]
tftp cluster put
source-file
[ destination-file ]
To do...
system-view
cluster
add-member
[ member-number ]
mac-address H-H-H
[ password password ]
delete-member
member-number
reboot member
{ member-number |
mac-address H-H-H }
[ eraseflash ]
quit
quit
Use the command...
Use the command...
Use the command...
1-12
Chapter 1 Cluster
Remarks
—
Required
—
Required
Remarks
Optional
Available in user view
Optional
Available in user view
Optional
Available in user view
Remarks
—
—
Optional
Optional
Optional
—
—