Displaying Netstream Configuration; Netstream Configuration Example - H3C S7500 Series Operation Manual

Operation Manual – NAT, Netstream, Policy Routing
H3C S7500 Series Ethernet Switches
Configure a template
aging time for updating
the template of version 9
Netstream packets

2.3 Displaying Netstream Configuration

Display the Netstream configuration
and status of the Netstream cache on
a specified LPU
Display information about Netstream
export packets on a specified LPU
Clear the Netstream statistics and
age all the stream entries in the
Netstream cache on a specified LPU

2.4 Netstream Configuration Example

I. Network Requirements
Configure Netstream on switch A to collect statistics on received packets. The LPU
used to implement Netstream is in slot 5. See
II. Network diagram
Switch A
Network
Figure 2-2 Network diagram for Netstream configuration on H3C S750
III. Configuration procedure
# Enable Netstream on the LPU in slot 5 to collect statistics about the inbound packets
on the interface board in slot 3.
To do...
ip netstream template
timeout minutes
To do...
GE2/0/5
VLAN 20
12.110.2.1/24
Use the command...
Use the command...
display ip netstream
cache slot slot-number
display ip netstream
export slot slot-number
reset ip netstream
statistics slot
slot-number
Figure 2-2.
NSC
12 .110 .2.2 /24
2-8
Chapter 2 Netstream Configuration
Remarks
Optional
By default, the template
aging time is 30 minutes.
Remarks
Available in
any view
Available in
user view
6