Operation Mannual – RRPP
H3C S7500 Series Ethernet Switches
Chapter 1 RRPP Configuration
When performing RRPP configuration, go to these sections for information you are
interested in:
RRPP Overview
Master Node Configuration
Transit Node Configuration
Edge Node Configuration
Assistant Edge Node Configuration
Configuration Examples
1.1 RRPP Overview
The Rapid Ring Protection Protocol (RRPP) is a link layer protocol designed for
Ethernet rings. RRPP can prevent broadcast storm caused by data loops when the
Ethernet rings are healthy, and rapidly restore the communication paths between
nodes after a link is disconnected on the Ethernet ring network.
Compared with the spanning tree protocol (STP), RRPP has the following
characteristics:
Dedicated to Ethernet ring topology
Fast response
1.1.1 Basic Concepts of RRPP
Master node
Transit node
Figure 1-1 RRPP networking
Domain 1
Switch A
Switch B
Port 1
Port 1
Port 2
Port 2
Ring 1
Port 2
Port 1
Port 1
Port 2
Switch C
Switch D
Assistant edge node
1-1
Chapter 1 RRPP Configuration
E
dge node
Port 3
Master node
Ri
ng 2
Switch E
Port 3