Displaying Rmon; Rmon Configuration Example - H3C S7500 Series Operation Manual

Operation Manual – SNMP and RMON
H3C S7500 Series Ethernet Switches

2.3 Displaying RMON

Display RMON statistics
Display RMON history
information
Display RMON alarm
information
Display extended RMON
alarm information
Display RMON events
Display RMON event logs

2.4 RMON Configuration Example

I. Network requirements
Ensure that the SNMP agents are correctly configured before performing RMON
configuration.
The switch to be tested has a configuration terminal connected to its console port
and is connected to a remote NMS through Internet. Create an entry in the
Ethernet statistics table to make statistics on the Ethernet port performance for
network administrator's retrieval.
II. Network diagram
Console port
Figure 2-1
III. Configuration procedures
# Configure RMON.
<H3C> system-view
[H3C] interface Ethernet2/0/1
[H3C-Ethernet2/0/1] rmon statistics 1 owner user1-rmon
# View RMON configuration.
[H3C-Ethernet2/0/1] display rmon statistics Ethernet2/0/1
To do...
display rmon statistics
[ interface-type interface-number ]
display rmon history [ interface-type
interface-number ]
display rmon alarm [ entry-number ]
display rmon prialarm
[ prialarm-entry-number ]
display rmon event [ event-entry ]
display rmon eventlog
[ event-entry ]
Network port
Switch
Network diagram for RMON configurati
Use the command...
Internet
on
2-5
Chapter 2 RMON Configuration
Remarks
Available in
any view
NMS