H3C S7500 Series Operation Manual page 719

Operation Manual – QoS
H3C S7500 Series Ethernet Switches
Add the port to the
specified VLAN
Enable the QinQ feature
in the port view
Enter QoS view
Enable the ACL rule for
traffic identifying and tag
the matching frames with
outer VLAN tags
Display the traffic
statistics
Display all the QoS
settings on the port
acl-rule: Applied ACL rules which can be the combination of various ACL rules. The
way of combination is described in
Table 1-11 The way of applying combined ACL rules
Apply all the rules in an IP ACL
separately
Apply a rule in an IP ACL separately
Apply all the rules in a link ACL
separately
Apply a rule in a link ACL separately
Apply a rule in an IP ACL and a rule in
a link ACL at the same time
To do...
port hybrid vlan vlan-id
{ tagged | untagged }
vlan-vpn enable
qos
traffic-remark-vlanid
inbound acl-rule
[ system-index ]
remark-vlan vlan-id
display qos-interface
[ interface-type
interface-number ]
traffic-remark-vlanid
display qos-interface
[ interface-type
interface-number ] all
ACL combination
Use the command...
Table 1-11.
Form of the acl-rule argument
ip-group { acl-number | acl-name }
ip-group { acl-number | acl-name } rule
rule-id
link-group { acl-number | acl-name }
link-group { acl-number | acl-name } rule
rule-id
ip-group { acl-number | acl-name } rule
rule-id link-group { acl-number |
acl-name } rule rule-id
1-32
Chapter 1 QoS Configuration
Remarks
The vlan-id argument is
the ID of the outer VLAN
tag.
Required
—
Required
Required
You can execute the
display command in any
view.