Displaying Policy Routing Configuration - H3C S7500 Series Operation Manual

Operation Manual – NAT, Netstream, Policy Routing
H3C S7500 Series Ethernet Switches
To do...
Enter system view
Enter VLAN view
Redirect
inbound
packets
matching
an ACL
or ACL
rule on an
LPU
Redirect
outbound
packets
matching
an ACL
or ACL
rule on an
LPU
Note:
Policy routing configurations only apply to packets that match permit ACL rules.
Refer to related command manual for more information about these commands.

3.3 Displaying Policy Routing Configuration

Display policy routing
configuration
Refer to related command manual for information about the display command.
system-view
vlan vlan-id
Redirect traffic-redirect inbound ip-group
packets { acl-number | acl-name } [ rule rule
to a [ system-index index ] ] interface
specified vlan-interface interface-number [ remark
VLAN { dscp dscp | { precedence precedence |
interface tos tos}* } ] slot slot-number
Redirect
traffic-redirect inbound ip-group
packets
{ acl-number | acl-name } [ rule rule
to a
[ system-index index ] ] next-hop ipaddr
specified
&1-3 [ remark { dscp dscp | { precedence
IP
precedence | tos tos}* } ] slot slot-number
address
Redirect traffic-redirect outbound ip-group
packets { acl-number | acl-name } [ rule rule
to a [ system-index index ] ] interface
specified vlan-interface interface-number [ remark
VLAN { dscp dscp | { precedence precedence |
interface tos tos }*} ] slot slot-number
Redirect
traffic-redirect outbound ip-group
packets
{ acl-number | acl-name } [ rule rule
to a
[ system-index index ] ] next-hop ipaddr
specified
&1-3 [ remark { dscp dscp | { precedence
IP
precedence | tos tos } *} ] slot slot-number
address
To do...
display qos-vlan
[ vlan-id ] traffic-redirect
Chapter 3 Policy Routing Configuration
Use the command...
Use the command...
3-2
Remarks
—
—
Perform
configuration
as required.
Remarks
Available in any view